THIS TRAINER IS COMPOSED AS FOLLOWS:
Work bench complete with:
Metal working panel fully plastic coated;
panel dimensions: 950 x 1050 mm. With Ø5 mm holes every 50mm (horizontally and vertically) for quick clamping of hydraulic components without using additional tools;
4 wheels (the 2 front wheels are lockable);
3 drawers with locking systems with key for storing components;
1 clipboard located on the side of the work bench.
- Movable hydraulic power unit.
This electrically powered hydraulic unit consists of:
6 litres transparent tank;
0.12Kw single-phase motor;
extra-silent gear pump, Q= 0.5 l/min;
pressure relief valve, P max: 10 bar;
pressure gauge: 0-16 bar Stop-Start switch;
quick fit couplings (1P –2T);
3m power cable with plug;
tap for inserting bubbles into circulating oil circuit;
oil can (5 litres) with special red colouring.
- Transparent components:
Double effect cylinder: d/e cylinder Ø20 x Ø10 x 58mm.
Manually actuated 4/2 distributor: manually actuated, spring return
Pressure relief valve: ball valve. Direct control.
3 connection divider with pressure gauge: 0-10 bar pressure gauge. One female + two male’s quick fit connectors.
Check valve: seat check valve.
Flow restrictor: needle flow restrictor, manual regulation.
6 connection divider: 6 male quick-fit self-sealing connectors, size NW4oSet of hoses: 6 NW3 x 520 mm length, 4 NW3 x 350 mm length. With quick-fit self-sealing female connectors.
Workbook with theory and practices
